Haben die besten High End DA-Wandler Röhrenausgangsstufen ?

Moderne mit altbewährter Technik vereint.
Warum moderne Digitaltechnik in DA-Wandlern mit altbackenen Röhren ?
Gern können Sie zu einem Hörtermin in unserem High End-Studio vorbeischauen.
Sie werden schnell verstehen warum einige der führenden High End-Hersteller die analoge Signalverarbeitung dieser digitalen Komponenten den Röhren überlassen. ;-) 

Das Ohr entscheidet was klingt, nicht das Datenblatt  !



LM 32 DAC

Cayin
Cayin iDAC-6MK2, Röhren D/A Wandler
Cayin iDAC-6MK2, Röhren D/A Wandler Dieser Desktop-D/A-Wandler decodiert dank neuem Wandler-Chip ESS ES9028Pro im nativen Modus bis zu 32 Bit / 768 kHz sowie DSD512 und DoP256 und bietet sechs Digital-Eingänge: USB-Audio, AES/EBU, BNC, Cinch, Toslink und I2S via Mini-HDMI. Der Cayin iDAC-6MKII lässt sich zwischen Vakuumröhre oder Halbleiter-Pufferstufe für den Cinch- und den XLR-Ausgang umschalten, um dem Hörempfinden seines Benutzers durch zwei unterschiedliche Klangcharakteristiken bis in die kleinsten Nuancen zu entsprechen. Eine Umschaltung zwischen Festpegel und geregelter Lautstärke ermöglicht die direkte Ansteuerung von Endstufen oder Aktivboxen. Das 3,95-Zoll-AMOLED-Display samt Bedienkonzept übernahm der Desktop-DAC vom Flaggschiff Cayin CS-100DAC. Aufeinander gestapelt ergeben der iDAP-6, der iDAC-6 und der iHA-6 ein vollsymmetrisches Head-Fi-System, das lediglich 24 x 21,5 cm Grundfläche benötigt. Technische Daten DAC-Chipset: ES9028Pro Ausgangsspannung: RCA: 2.2V RMS, BAL: 4.4V RMS Röhrenbestückung: 4 x 6N1B Abmessungen (B xT x H): 240mm x 252mm 69mm Gewicht (kg): 3,8 Eingänge USB unterstützt DSD64-DSD512 native, PCM bis 32Bit/768kHz AES/EBU, Optisch, Coax: bis 24Bit/192kHz, DSD64 (DoP) Ausgänge Line und Preamp: XLR (symmetrisch) RCA (unsymmetrisch, schaltbar Röhre/Transistor) Ausgangspannung Line: 2.2V+2.2V RCA, 4.4V+4.4V XLR Transistor und Röhre Preamp: 7V+7V RCA Transistor, 6V+6V RCA Röhre 13V+13V XLR Transistor, 10V+10V XLR Röhre

1.298,00 €*
Copland
Copland DAC215, Röhrenvorverstärker, DA-Wandler, Kopfhörerverstärker, Klangtip !
Copland DAC215, Röhrenvorverstärker, DSD-fähiger DA-Wandler, Kopfhörerverstärker Der Copland kann als D/A-Wandler, Vorverstärker oder als Kopfhörerverstärker eingesetzt werden. Er verarbeitet digitale Audiodaten mit hoher Auflösung (24bit/192kHz, DSD128) – die Wiedergabequalität wird nur durch die Musikdateien selbst limitiert. Schön das er auch einen analogen Cincheingang hat , es gibt ja auch Vinyl. ;-) Digital revolutioniert  Die digitale Revolution hat uns Musik leichter denn je zuvor zugänglich gemacht. Wegen der bequem verfügbaren musikalischen Vielfalt, aber auch aufgrund der beeindruckenden Klangqualität hochauflösender digitaler Musikdateien nutzen viele Audiophile heutzutage ihren Computer oder Laptop als primäre Audioquelle. Der Copland DAC215 verarbeitet digitale Audiodaten mit extrem hoher Auflösung – die Wiedergabequalität wird nur durch die Musikdateien selbst limitiert. Technik für den guten Klang Röhrenbestückung: Doppeltriode 2x ECC88 32-Bit-D/A-Wandler Sabre Reference ES9018 Asynchrone USB-Übertragung bis 24 Bit/192 kHz für die Musikwiedergabe vom Computer Drei S/PDIF-Digitaleingänge: 1x koaxial und 2x optisch Ein USB-Eingang zum Anschluss eines Computers an die Hifi-Anlage. DSD-Wiedergabe bis DSD128 vom Computer über den USB-Eingang Ein Hochpegeleingang zum Anschluss z.B. eines Phono-Vorverstärkers, um einen Plattenspieler zu betreiben Ein Vorverstärkerausgang mit Lautstärkregelung (Amplifier Output) zum Anschluss von Endverstärkern Ein Hochpegelausgang ohne Lautstärkeregelung (DAC-Output) zum Anschluss an einen Vor- oder Vollverstärker Bypass für die Vorverstärkerfunktion und die Lautstärkeregelung. Der Copland DAC 215 agiert dann als reiner D/A-Wandler  Der Copland DAC215 kann als D/A-Wandler mit Vorverstärkerfunktion oder als reiner D/A-Wandler eingesetzt werden. Am integrierten Kopfhörerverstärker in Class A-Schaltung spielt auch der hochkarätigste Kopfhörer in Bestform auf. Ihre Lieblingsmusik kann so ganz "privat" genossen werden. Neben einer tresorartigen Verarbeitung im attraktiven nordischen Design, das Copland wie kaum ein anderer Hersteller pflegt, legen die Dänen besonderen Wert darauf, Geräte auf extreme Langlebigkeit hin zu konstruieren. Bei der Röhrenbestückung kommen deswegen ausschließlich leicht verfügbare Typen in hochwertiger Qualität zum Einsatz. Die Ersatzteilversorgung ist so auf viele Jahre hin gesichert. Technische Daten Maße B x H x T: 200 x 115 x 280mm Gewicht: 3,9kg

2.200,00 €*
Line Magnetic
Line Magnetic LM-32DAC, DA-Wandler mit Röhrenausgangsstufe
 Line Magnetic LM-32DAC, DA-Wandler mit Röhrenausgangsstufe Der Line Magnetic LM-32DAC ist ein röhrenbestückter (12AU7) Digital/Analog Wandler. Als DAC-Chip wandelt der hochwertige und erprobte ESS 9028PRO gekonnt Inhalte bis 32Bit/384kHz (USB) und versteht sich mit DSD Signalen bis DSD256. Bei Bedarf lässt sich der LM-32DAC zwischen Röhre und Transistor umschalten. Durch seine klassischen Hi-Fi Maße schmiegt er sich formschön in das bestehende Esemble ein. Technische Daten DAC-Chip: SABRE ESS 9028Pro Eingänge: AES/EBU, USB, Toslink(optical) ,Koaxial,BNC Sampling Rate USB: 32 Bit ,384kHz Sampling Rate allegemein: 32 Bit,192kHz DSD Unterstützung: DSD64 ,DSD128,DSD256 Frequenzgang:15Hz-50Khz THD: 0.5%(tube) / 0.02%(solid state) Ausgänge: XLR (symmetrisch) RCA /Chinch Rauschabstand: 92dB(Röhre) / 98dB(Transistor) Röhren: 12AU7/ ECC82 Gewicht: 6,7 Kg Maße (B x T x H): 430x325x105mm

3.299,00 €*
!
Ayon Audio
Ayon Audio CD10 II, HighEnd CD-Player / DSD-DA-Wandler mit Class-A-Röhrenausgangsstufe, Highlight !!
Ayon Audio CD10 II, HighEnd CD-Player / DSD-DA-Wandler mit Class-A-Röhrenausgangsstufe, Demogerät Der DSD / CD-Einstieg von Ayon !Angenehme Klangabstimung mit Auflösung und Dynamik. Unserer Meinung nach ein Volltreffer für alle Musikrichtungen.In der Signature-Version ein Highlight mit Suchtfaktor bei dem man feuchte Augen bekommt.CD-Wiedergabe, DSD mit 256x, sowie PCM Wandlung mit bis zu 768kHz und 32 Bit.Absolute State-of-the-Art! English Information Ayon is pleased to introduce the CD-10, a new redesign of our already very highly regarded CD-1sx model offering.  The CD-10 is in many respects a ground-breaking CD-Player design with an advanced technology like a single-ended triode 6H30 output stage, a new DAC design, an advanced magnetic clamp system and a switchable PCM-DSD converter. This Player is presenting a new level of musical performance with stunning vitality, clarity, natural warmth, superb dynamic contrasts and besides all of them a superb construction quality.  In this price-range the CD-10 is one of the most innovative and tonal best CD-players ever built in the more than 35-year long CD-history. Features & Design Full-featured Tube Top Loader CD-Player. Class-A triode vacuum-tube output stage for single-ended & balanced operation. Signal Path  We believe that the simplest circuits work best together with the shortest signal path. That is why our pre-amplifiers to date have used single-ended pure class-A circuitry. The shorter the signal path is, the less possibility of sonic degradation from various sources, including the wire itself. Even on the circuit boards, the copper traces are kept to a very minimum length. The completely redesigned circuit board provides a more straightforward and direct approach to the signal paths.  Logical sequenced soft-start power up for extended tube life Warm up function 0dB negative feedback  (of any kind ) Ultra short signal path Simplest direct circuit path for purest musical sound and high reliability Low output impedance for driving long runs interconnect to an amplifier, and any tube or solid statepower amp No solid state devices in the analog tube output (signal path ) Minimal discrete wiring for optimum signal propagation No followers or buffers in the signal path No DC servo that degrades the signal High quality parts throughout Fully hand assembled to insure the highest level of craftsmanship Separate analog output stage for left and right channel Digital input - S/PDIF (RCA), & TosLink USB input – 24/384 kHz and DSD 64x/128x Digital output - S/PDIF (RCA)  Power Supply The power supplies have been further refined with new components and enhanced AC line noise filtration. Separate power transformer windings and filters provide total isolation between the input and output stage which makes this a pure power source and it is a critical attribute for a 6H30 output stage. We also use electrolytic capacitors with much larger storage capacity to make up for the loss in filtering when using resistors in lieu of inductors. R-Core / Low noise – insulated power transformer for digital & analog Innovative power supply provides a high speed energy delivery on transients Separate and isolated power supplies over each stage of amplification AC power line filter to avoid noise and hash from entering into the unit. Tube rectification for analog output stage 10 separate voltage regulators     Components The type of parts used therefore must have a synergistic relationship to the circuit they are placed in. It is this relationship of which type of part to use where, that ranks our products apart from the mass. Selected, premium quality passive components used in all applications High speed & high quality audiophile grade coupling capacitors High quality special tube sockets with gold pins Capacitors ( MKP 2% ) High quality – RCA & XLR jack Gold-plated industrial grade PCB  Mechanical Construction The high grade aluminum chassis impart a richer, more lustrous tonality with a cleaner back-ground and less hash and grain. All brushed anodized anti-vibration-resonance and non-magnetic chassis’s are fully hand assembled to insure the highest level of craftsmanship. Backlit function buttons Modified suspension system to isolate the SACD/CD-transport from mechanical  vibrations Anti-vibration magnetic CD-clamp system with dark acrylic CD-LID The aluminium feet are resonance absorbing types Metal remote commander Chassis finish: black / chrome Technische Daten CD-Player: Ayon CD-10 II Gerätetyp: CD Spieler inkl. DAC Sampling-Rate: 768kHz/32Bit & DSD 11.2MHz/256 Röhren-Analog: 2x 6N6P Röhren-PSU: 6Z4 (6C4P) Dynamik: > 119dB Output level @1 kHz / Rms - LOW: 0-2.5V variable oder 2.5V fixed Output level @1 kHz / Rms - HIGH: 0-5V variable oder 5V fixed Output impedance Single-Ended-RCA: ~ 300 Ohms Output impedance Balanced-XLR: ~ 300 Ohms Digital output: S/PDIF (RCA) Digital input: SPDIF, TosLink, USB 24/384 und DSD 64x/128x Analog output: RCA & XLR SNR: > 119 dB Frequenzgang: 20Hz-40kHz +/- 0.3dB THD @ 1kHz: < 0.001% IR Fernbedienung: Ja Abmessungen(BxTxH) cm: 48x36x12 cm Gewicht: 13 kg

4.450,00 €* UVP 4.995,00 €* * (10.91% gespart)
Ayon Audio
Ayon Audio Stealth, State of the Art Digital/Analog-Wandler mit Röhrenvorstufe, Demogerät
Ayon Stealth, DA-Wandler / Vorverstärker mit Röhren-Trioden-Ausgangsstufe und integriertem Vorverstärker.Angebot Demogerät Der Ayon Stealth DAC ist ein DSD-fähiger Digital-Analog-Wandler in Referenz-Technologie und vollsymmetrischem Schaltungslayout des digitalen wie analogen Signalwegs. Die Digitalstufe des Stealth DAC verwendet jeweils 4 parallel arbeitende DACs / Kanal zur Wandlung von 24/192k Digitalsignalen. Die folgende Differentialverstärkerstufe ist mit 6H30-Hochleistungs-Trioden pro Kanal bestückt. Das Netzteil des Stealth DAC ist großzügig überdimensioniert, verfügt über Röhrengleichrichtung, Drosselsiebung sowie drei Hochleistungstransformatoren, zwei für die Analogstufe und einen für die Digitalschaltung. Der Klang des Stealth verbindet absolute Transparenz und Detailpräzision mit natürlichen Klangfarben und höchster Musikalität zu einer holografischen, extrem wirklichkeitsgetreuen Wiedergabe der Musik in ihrer natürlichen Ganzheit. Mit dem Stealth DAC steht Musikliebhabern eine Digitalquelle zu Verfügung, deren herausragende Musikalität nur mehr mit den besten Analogquellen vergleichbar ist. English Information Full-featured Tube D/A converter and Preamp Class-A triode vacuum-tube output stage for single-ended & balanced operation Signal Path  We believe that the simplest circuits work best together with the shortest signal path. That is why our pre-amplifiers to date have used single-ended pure class-A circuitry. The shorter the signal path is, the less possibility of sonic degradation from various sources, including the wire itself. Even on the circuit boards, the copper traces are kept to a very minimum length. The completely redesigned circuit board provides a more straightforward and direct approach to the signal paths. Logical sequenced soft-start power up for extended tube life Warm up function 0dB negative feedback  (of any kind ) Ultra short signal path Simplest direct circuit path for purest musical sound and high reliability Low output impedance for driving long runs interconnect to an amplifier, and any tube or solid state power amp No solid state devices in the analog tube output (signal path) Minimal discrete wiring for optimum signal propagation No followers or buffers in the signal path High quality parts throughout Fully hand assembled to insure the highest level of craftsmanship Separate analog output stage for left and right channel Analog inputs Upsampling and on/off switchable All digital inputs USB input (24/192 asynchronous  and DSD) DSD128 via BNC Power Supply The power supplies have been further refined with new components and enhanced AC line noise filtration. Separate power transformer windings and filters provide total isolation between the input and output stage which makes this a pure power source and it is a critical attribute for a 6H30 output stage. We also use electrolytic capacitors with much larger storage capacity to make up for the loss in filtering when using resistors in lieu of inductors. 2 separate R-Core / Low noise – insulated power transformer for digital & analog Tube rectification Choke – filtered power supply and coupled with special film caps Innovative power supply provides a high speed energy delivery on transients Separate and isolated power supplies over each stage of amplification Regulated DC filament supplies with soft start for tube AC power line filter to avoid noise and hash from entering into the unit. 10 separate voltage regulators Components The type of parts used therefore must have a synergistic relationship to the circuit they are placed in. It is this relationship of which type of part to use where, that ranks our products apart from the mass. Selected, premium quality passive components used in all applications   High speed  & high quality audiophile grade coupling capacitors High quality Teflon tube sockets with gold pins Superior capacitors ( MKP 1% ) High quality – RCA & XLR jack Gold-plated industrial grade PCB Mechanical Construction The high grade aluminum chassis impart a richer, more lustrous tonality with a cleaner back-ground and less hash and grain. All brushed anodized anti-vibration-resonance and non-magnetic chassis’s are fully hand assembled to insure the highest level of craftsmanship. Front panel descriptions are engraved AC phase polarity control indicator The aluminium feet are resonance absorbing types Chassis finish: black / chrome Technische Daten Digital/Analog Converter: Ayon Stealth Conversion rate: 192kHz / 32 bit & DSD 5.6Mhz/128 Tube complement – Analog output: 6H30 Dynamic range: > 120dB Output level @1 kHz / Rms:0-10V Output impedance  Single-Ended-RCA: ~ 300 Ohms Output impedance  Balanced-XLR: ~ 300 Ohms Digital input: 1 x S/PDIF, 1 x AES/EBU, 1 x Toslink, 1 x BNC, 1 x USB, 1 x I2S, 3 x BNC for DSD Analog line  input/output: RCA Analog output: RCA & XLR S/N ratio: > 120 dB Frequency response: 20Hz - 20kHz  +/- 0.2dB Total harmonic distortion @ 1kHz: < 0.002% Remote control: Yes Dimension (WxDxH): 48x40x11 cm Weight: 16 kg

5.480,00 €* UVP 6.995,00 €* * (21.66% gespart)
Ayon Audio
Ayon Audio Kronos, D-A Wandler inklusive Röhren-Vorstufe
Ayon Audio Kronos, D-A Wandler inklusive Röhren-Vorstufe Der Kronos ist für die Computerwiedergabe und den allgemeinen professionellen DSD-Audioeinsatz ausgelegt. Sein neues Design mit einer fortschrittlichen Technologie wie einer neuen Röhrenausgangsstufe, einem neuen DAC-Design und einem umschaltbaren PCM-DSD-Wandler ist in jeder Hinsicht bahnbrechend. Der Kronos DAC ist in 3 verschiedenen Versionen (jederzeit aufrüstbar), als Kronos "XS", Kronos "Signature" und Kronos "Ultimate" (Top-Level-Version) erhältlich. Basierend auf einer Null-Feedback-Röhrenschaltung und einem röhrengleichgerichteten Netzteil, enthüllt der Kronos die vielfältigen Ebenen der Musik mit äußerster Transparenz und projiziert eine tiefe und hoch fokussierte 3D-Klangbühne.Sein Bass ist ausgedehnt und kraftvoll, sein Mitteltonbereich rein, flüssig und von natürlicher Wärme durchdrungen, während die Höhen außerordentlich sauber und fein detailliert sind. Der KRONOS in der Signature Version bietet zusätzlich einen PCM-DSD Wandler für alle PCM-Signale. Dazu verwendet Ayon in dieser Version hochwertige Koppelkondensatoren um u.a. DC-Anteile von der Wechselspannung zu trennen und Störungen zu kompensieren. Die Ultimate Version des KRONOS bietet ebenfalls einen PCM-DSD Wandler für alle PCM-Signale. Bei dieser Version werden höchstwertige Koppelkondensatoren und zusätzlich spezielle Leistungskondensatoren für die Stromversorgung verwendet. Diese sind für die Militärtechnik spezifiziert und von höchster Güte. Dieser Referenz-DAC bietet in jeder Hinsicht ein kompromissloses Qualitätsniveau. Der Kronos ist einer der aufregendsten DAC mit Röhrenendstufe und der bestklingende DAC, den Ayon Audio je gebaut hat. Features Röhren-D/A-Wandler Trioden-Ausgangsstufe Class-A Ultrakurze Signalwege, auch auf den Leiterplatten Logischer sequenzieller Soft-Start, schont die Röhren Aufwärmfunktion 0dB Gegenkopplung (jeglicher Art) Einfachster direkter Schaltungspfad Niedrige Ausgangsimpedanz Keine Halbleiter-Bauelemente im analogen Röhrenausgang (Signalweg) Separate analoge Ausgangsstufe für den linken und rechten Kanal Analoge Lautstärkeregelung Interner Taktgenerator mit extrem niedrigem Jitter vollständige Isolierung zwischen der Eingangs- und der Ausgangsstufe AC-Netzfilter Röhrenfassungen mit Goldpins Vergoldete Leiterplatte AC-Phasenpolaritätskontrollanzeige resonanzabsorbierende Aluminiumfüße Technische Daten 2 x 6N6P & 2 x 5687 SE Röhren 2 x Line Eingang RCA 1 x symm. Eingang XLR Wandler Rate. 24/384 kHz DAC-Konfiguration: vollständig symmetrisch / AKM-Japan Dynamikumfang: > 120dB Ausgangspegel @1 kHz / 0,775V -0dB Niedrig: 2,6V fest oder 0 - 2,5 V rms variabel Ausgangspegel @1 kHz / 0,775V -0dB Hoch: 5,2V fest oder 0 - 5V rms variabel Ausgangsimpedanz: Single-Ended-RCA ~ 300 Ω Ausgangsimpedanz: Symmetrisch-XLR ~ 300 Ω Digitalausgang: 75 Ω S/PDIF (RCA) PCM Digitaleingang: USB-24/384kHz, SPDIF, TosLink, I2S, BNC, AES/EBU DSD Digitaleingang: USB-DSD, 3 x BNC für DSD S/N-Verhältnis > 120 dB Frequenzgang: 20Hz - 50kHz +/- 0,3dB THD/harmonische Verzerrung @ 1kHz < 0,001% Fernsteuerung: Ja Analogausgänge: RCA & XLR Abmessungen (BxTxH): 48x39x13 cm Gewicht: 15 kg

7.995,00 €*
Ayon Audio
Ayon Audio CD-35 II, HighEnd CD-Player / DSD-DA-Wandler mit Class-A-Röhrenausgangsstufe, A&V Klangreferenz !!
Ayon CD-35, Referenz CD-Player mit DSD-Audio DA-Wandler mit Class-A-Röhrenausgangsstufe und Röhrenvorverstärker-Option Der Ayon CD-35 II ist der wohl ausgefeilteste CD Player am Markt mit Röhrennetzteil und Röhrenausgangsstufe in Kombination mit der phantastischen digital Wandlung an der Grenze des heute Machbaren. Numehr mit einem nochmal verfeinerten, speziell auf reine CD-Wiedergabe optimierten Laufwerk. Und der integrierte DAC geht soweit wie heute möglich:Natives DSD über BNC mit 512x, sowie PCM Wandlung mit bis zu 768kHz und 32 Bit.Absolute State-of-the-Art! Die analoge, vollsymmetrische Quad Electric Lautstärkeregelung sowie 3x Hochpegel-Eingänge erweitern den CD-35 II zu einem CD-Spieler + Wandler mit integrierter Röhren Vorstufe die Ihresgleichen sucht!Weiter noch imgeht de Signature Option! Hier wird nicht mehr nur Upsampling geboten. Jedes eingehende PCM Signal - also auch das der CD - wuird intern in einen DSD Stream konvertiert und dann erst analog gewandelt. Das Ergebnis:Noch mehr Natürlichkeit und Dreidimensionalität! Hier nochmal der Faktencheck Top-Loader CD-Spieler, Wandler und Vorstufe in einem Gerät Coax SPDIF, AES/EBU, BNC, I2S, USB, DSD und DSD-Native 3x BNC) Digitaleingänge Analog XLR und 2x Analog Cinch Eingänge Vollsymmetrischer AKM Wandler bis 768k/32 und DSD256 Class-A Röhrenausgangsstufe mit 6H30 / 5687 Röhren Doppel-Netzteil, Choke, 10 Spannungsregler, GZ30 Gleichrichterröhre Analoge Lautstärkeregelung (symmetrisch / kanal) Signature Option mit PCM-DSD Conversion und Mudorf Caps English Information The Ayon CD-35 establishes a new benchmark in SE-Triode vacuum-tube CD-Player performance by combining a fully balanced PCM-DSD DAC.The CD-35 is also prepared for computer playback and general DSD professional audio use. The CD-35 is in many respects a new ground-breaking CD-Player design with an advanced technology like a new vacuum tube output stage, new magnetic clamp system with separate CD-LID, new DAC design and a switchable PCM-DSD converter (DSP module). Based on a zero-feedback, pure tube circuit design and a tube rectified power supply, the CD-35 reveals the manifold layers of music with utmost transparency while projecting a deep and highly focused 3D soundstage. Its bass is extended and powerful, its midrange pure, liquid and permeated with natural warmth, while the top is extraordinarily clean and finely detailed. This Reference CD-Player offers an uncompromising quality level in every aspect. The CD-35 is one of the most exciting CD/SACD-Player with vacuum-tube output stage and the best sounding CD-Player what Ayon Audio ever built. Full-featured Tube Top Loader CD-PlayerClass-A triode vacuum-tube output stage for single-ended & balanced operation Signal Path We believe that the simplest circuits work best together with the shortest signal path. That is why our pre-amplifiers to date have used single-ended pure class-A circuitry. The shorter the signal path is, the less possibility of sonic degradation from various sources, including the wire itself. Even on the circuit boards, the copper traces are kept to a very minimum length. The completely redesigned circuit board provides a more straightforward and direct approach to the signal paths. ●  Logical sequenced soft-start power up for extended tube life●  Warm up function●  0dB negative feedback  (of any kind)●  Ultra short signal path●  Simplest direct circuit path for purest musical sound and high reliability●  Low output impedance for driving long runs interconnect to an amplifier, and any tube or solid state power amp●  No solid state devices in the analog tube output (signal path )●  Minimal discrete wiring for optimum signal propagation●  No followers or buffers in the signal path●  No DC servo that degrades the signal●  High quality parts throughout●  Fully hand assembled to insure the highest level of craftsmanship●  Separate analog output stage for left and right channel●  The volume is controlled in the analogue domain●  DAC digital input - S/PDIF (RCA) , AES/EBU (XLR), I2S, BNC, USB, 3 x BNC for DSD;●  Digital output - S/PDIF (RCA) ●  Ultra-low jitter internal clock generator Power Supply The power supplies have been further refined with new components and enhanced AC line noise filtration. Separate power transformer windings and filters provide total isolation between the input and output stage which makes this a pure power source and it is a critical attribute for a 6H30/5687 output stage. We also use electrolytic capacitors with much larger storage capacity to make up for the loss in filtering when using resistors in lieu of inductors. ●  2 separate R-Core / Low noise – insulated power transformer for digital & analog●  Innovative power supply provides a high speed energy delivery on transients●  Separate and isolated power supplies over each stage of amplification●  Tube rectification for 6H30/5687 analog output stage●  Choke filtering for 6H30/5687●  Regulated DC filament supplies with soft start for 6H30/5687●  AC power line filter to avoid noise and hash from entering into the unit.●  10 separate voltage regulators Components The type of parts used therefore must have a synergistic relationship to the circuit they are placed in. It is this relationship of which type of part to use where, that ranks our products apart from the mass. ●  Selected, premium quality passive components used in all applications●  High speed  & high quality audiophile grade coupling capacitors ●  High quality special tube sockets with gold pins●  Superior capacitors ●  High quality – RCA & XLR jack●  Gold-plated industrial grade PCB Mechanical Construction The high grade aluminum chassis impart a richer, more lustrous tonality with a cleaner back-ground and less hash and grain. All brushed anodized anti-vibration-resonance and non-magnetic chassis’s are fully hand assembled to insure the highest level of craftsmanship. ●  Backlit function buttons ●  Modified suspension system to isolate the CD-transport from mechanical  vibrations●  Anti-vibration magnetic CD-clamp system with dark acrylic CD-LID●  Front panel descriptions are engraved●  The aluminium feet are resonance absorbing types●  Chassis finish: black / chrome Technische Daten CD-Player: Ayon CD-35 Gerätetyp: CD Spieler inkl DAC+Vorstufe Sampling-Rate: 768kHz/32Bit & DSD 11.2MHz/256 Röhren-Analog: 2x 6H30 & 2x 5687 Röhren-PSU: 1x GZ30 Dynamik: > 120dB Output level @1 kHz / Rms - LOW: 0-2.5V variable oder 2.5V fixed Output level @1 kHz / Rms - HIGH: 0-5V variable oder 5V fixed Output impedance Single-Ended-RCA: ~ 300 Ohms Output impedance Balanced-XLR: ~ 300 Ohms Digital output: S/PDIF (RCA) Digital input: SPDIF, AES/EBU, BNC, I2S, USB 24/192, 3xBNC für DSD Analog input: 1x XLR In, 2x Line In (RCA) Analog output: RCA & XLR SNR: > 120 dB Frequenzgang: 20Hz-20kHz +/- 0.2dB THD @ 1kHz: < 0.002% IR Fernbedienung: Ja Abmessungen(BxTxH) cm: 48x39x12 cm Gewicht: 17 kg

8.995,00 €*
Was Sie wissen sollten

Schnäppchen, rote Plakate und leere Versprechungen

Sie möchten gern unser Kunde sein aber die Preise im Shop gefallen Ihnen nicht ?

Bitte senden Sie uns eine Anfrage mit Ihren Wünschen und Ihrer Preisvorstellung. Bitte teilen Sie uns auch mit, ob Ihnen der Service im Rahmen gesetzlicher Bestimmungen genügt, oder ob Sie mehr von uns erwarten. So können wir schauen wie weit unsere Zauberkräfte reichen und hoffentlich ein für beide Seiten faires Angebot kalkulieren.

Anfrage senden