FiiO Q5s, HighEnd USB-DAC und Bluetooth-Kopfhörerverstärker

FiiO Q5s - HighEnd USB-DAC und Bluetooth-Kopfhörerverstärker

• HighEnd USB-DAC und Bluetooth-Kopfhörerverstärker
• Bluetooth 5.0 mit AAC,SBC,aptX,aptX Low Latency, aptX HD,LDAC,HWA
• Tauschbare AMP -Module (wird mit AM3E ausgeliefert)
• Dual AKM AK4493EQ mit DSD256 und 32/768 Bit/kHz
• 10 Stunden Laufzeit
• LINE-AUSGANG: 3,5 mm Klinke
• Kopfhörerausgang: 3,5mm, 2,5mm und 4,4mm bis zu 560mW an 32 Ohm
• S/PDIF Koaxial und optischer Digitaleingang

Technische Daten

• Audio Input - Standard 3.5mm Port (Shared Line / Coaxial/ Optical in)
• Digital Coaxial Input Port - Standard 3.5mm Port (Shared Line / Coaxial/ Optical in)
• Digital/Optical Input Port - Standard 3.5mm Port (Shared Line / Coaxial/ Optical in)
• USB Port - Micro USB(11pin)- Data exchanging, Charging?Firmware upgrade
• Analog Input port(LO) - Standard 3.5mm stereo jack
• Headphone Output Port - Standard 3.5mm stereo jack
• Balanced Output Port - 2.5mm/4.4mm port
• Recommended Headphone Impedance 16~150O(PO) 16~300O(BAL)
• Channel Balance : 0.1 dB
• Gain :  Yes(High/Low)
• Bass Boost : Yes
• Volume Control : Potentiometer(ADC Sampling)
• APP interconnection : Supports setting through App
• Bluetooth codec indication : Yes
• Supports connection to Sony Walkman players : Yes
• Sampling rate indication : Yes
• Sampling Rate Supported Up to : 768kHz/32bit(USB IN), 192KHz/24bit(COAX IN), 96KHz/24bit(OPT IN) DSD Support(USB IN) : DSD64/128/256
• Chips Used : DAC: AK4493EQ * 2 , USB: XMOS XU208 , Bluetooth: CSR8675 , LPF:OPA1642×2,Volume IC:NJW1195 OP+AMP:AD8620+OPA926

Line output specifications

• THD+N : <0.001% (1 kHz/10kO)
• SNR : =115 dB (A-weighted)
• Frequency Response : 5 Hz~90 kHz(-3dB)
• Channel Separation : >97 dB (1 kHz)
• Line level : 1.8 Vrms

AM3E Headphone out specifications (3.5mm headphone out jack)

1. Output Power 1 : =280 mW(16O / THD+N<1%)
2. Output Power 2 : =210 mW(32O /THD+N<1%)
3. Output Power 3 : =30 mW(300O / THD+N<1%)
4. Frequency Response :5 Hz~50 kHz(-3dB)
5. SNR : =117 dB (A-weighted)
6. Max. Input Level : 3.8 Vrms
7. Output Impedance : <1.2O (32O loaded)
8. Channel Separation : =75 dB (1 kHz,AUX IN) THD+N : <0.002% (1 kHz)
9. Peak Output Voltage : >6 Vp-p Max.
10. Output Current : 150mA (For reference)

Balanced headphone out specifications (2.5mm/4.4mm TRRS headphone out jack)

• Output Power 1 : =535 mW(16O / THD+N<1%)
• Output Power 2 : =560 mW(32O /THD+N<1%)
• Output Power 3 : =112 mW(300O / THD+N<1%)
• Frequency Response :  5 Hz~50kHz(-3dB)
• SNR : =115 dB (A-weighted)
• Output Impedance : <2O (32O loaded):
• Channel Separation : =105 dB (1 kHz,AUX IN) THD+N : <0.002% (1 kHz)
• Peak Output Voltage : >10.5 Vp-p Max.
• Output Current : 150 mA (For reference)

Others

• Deep-sleep : Automatic stand-by, can be controlled on App Firmware upgrade : System firmware and Bluetooth version can be upgraded through
• USB Power Supply : DC5V 2A (Recommended)
• Battery Capacity : 3800 mAh
• Charge Time : =3.5 h (DV5V 2A)

Battery Life

• >25 h (AUX IN)
• >9.5 h (USB IN)
• >9.5 h (OPT IN)
• >9.5 h (COAX IN)
• >9.5 h (Bluetooth IN)

• Bluetooth : Bluetooth 5.0, supports AAC/SBC/aptX/aptX Low Latency/aptX HD/LDAC/HWA
• MFi : Yes
• Dimensions : About 124mm x 64mm x 16mm
• Weight: 195g
• Case : Silver