Tannoy - Lautsprecher - Tradition von der Insel

Tannoy Autograph Mini, Kompaktlautsprecher (Paarpreis) Remaining true to the cabinet build and finish quality of the original, the Autograph Mini incorporates a 100 mm (4.00”) Dual Concentric™ driver. Combining wide bandwidth technology, a heavy cast alloy frame and multi fibre paper pulp cone, this miniature Dual performs with subtlety, stunning detail and expansive imaging. Its titanium diaphragm high frequency unit is positioned on the same axis as the bass section and fitted with a neodymium magnet system to deliver a smooth response up to an incredible 54kHz.Ensuring complete signal path integrity, 99.99% high purity silver cable is used to connect the tweeter to the system’s minimalist crossover network. This thoroughbred audiophile component includes low loss inductors and specially damped audio grade capacitors. Like the original and all Tannoy Prestige Series loudspeakers, the Autograph Mini’s hexagonal cabinet is finely constructed from the finest birch wood ply and finished with hardwood trim. The authentic oatmeal coloured grille cloth matches that of its 1954 designed forbear. Specifications PERFORMANCE Recommended amplifier power 20 - 100 Watts Continuous power handling 50 Watts RMS Frequency response 68Hz - 54kHz -6dB Sensitivity 88dB (2.83 Volts @ 1 metre) Nominal impedance 8 Ohms DRIVE UNITS Dual Concentric™ high frequency 19mm (0.75”) titanium dome with Tulip WaveGuide™ Dual Concentric™ low frequency 100mm (4.00”) treated paper pulp cone with rubber surround. 33mm (1.33”) edge wound voice coil Dispersion 90 degrees conical CROSSOVER Frequency 2.3kHz Type Passive low loss 2nd order compensated LF, 1st order compensated HF CONSTRUCTION Enclosure type Rear ported Volume 3.5L (213.5 cu.ins”) Dimensions 343 x 210 x 130mm(13.50 x 8.25 x 5.00”) Weight 4.0kg (8.8 lbs) Finish Teak veneer with solid teak trim detail

Tannoy Canterbury GR, Standlautsprecher (Paarpreis) The legendary 15in Dual has been upgraded extensively for the Gold Reference series with many of the enhancements being ‘trickle-down’ technology from Tannoy’s flagship Kingdom Royal development project. The low frequency section of the GR driver has a new fibre enriched paper pulp cone material to realise further improvements in the cone’s mechanical characteristics. The cone is terminated with a twin roll surround of impregnated fabric for improved damping characteristics. The Canterbury GR’s HF unit marks a significant leap forward in the technology and performance comprising a new aluminium-magnesium alloy compression driver diaphragm that has been heat treated to further improve it mechanical integrity under HF loads. The use of new Mylar™ surround materials offer improved damping and motor cooling, resulting in exceptional clarity and articulation throughout the HF range. Capable of high-volume listening without fatigue, the Gold Reference Dual brings even greater naturalness and presence to the Tannoy Canterbury loudspeaker. The massive Canterbury crossover has been redesigned to provide a cleaner and more accurate signal to the new 15in Dual. Featuring Tannoy-specification ICW ClarityCap™ MR capacitors, low loss laminated core inductors and thick-film resistors, the entire crossover is Deep Cryogenically Treated as a whole unit. The process has allowed the Canterbury GR to achieve unparalleled gains in resolution and deliver an even more natural and cohesive sound. The bespoke birch plywood cabinetry has been engineered with a Variable Distributed Port system allowing low frequency output to be tuned to suit any room dimensions. The extensively braced and damped cabinet is made with time-honoured traditional craftsmanship by Tannoy’s finest cabinet makers. The timeless beauty of the oiled walnut veneer and hand selected burr walnut inlays is complemented with gold anodised machined metal trim and a welcome return of the classic Tannoy lightning strike logo. The Canterbury GR’s 15in Dual with its signature PepperPot WaveGuide™, Alnico motor system and HF compression driver delivers a superbly dynamic overall presentation with fast, accurate bass and a fluid and open midrange. The dual variable distributed port system and Tannoy’s signature High Frequency power switch gives unique flexibility with room placement and personal tuning. The classic Tannoy design, high-tech advances in driver and crossover manufacturing and the finest British cabinetry make Gold Reference the finest evolution of the classic Tannoy Canterbury to date. Specifications PERFORMANCE Recommended amplifier power 20 - 300 Watts Continuous power handling 150 Watts RMS Peak power handling 600 watt Sensitivity 96 dB (2.83 volt @ 1 m) Nominal impedance 8 Ohms Minimum Impedance 5 Ohms Frequency Response 28 Hz - 27 kHz (-6 dB) Dispersion 90 degrees conical DRIVE UNITS Dual Concentric™ high frequency 52 mm (2”) aluminium/magnesium alloy dome with round wire voice coil. Dual Concentric™ low frequency 380 mm (15”) with paper pulp cone and twin roll impregnated fabric surround.52 mm (2”) round wire voice coil.l CROSSOVER Frequency 1.1kHz Type Bi-wired, hard wired passive, low loss, Time compensated. 2nd order low pass. 2nd order high pass Deep cryogenically treated. Adjustment +/-3 dB over 1.1 kHz to 27 kHz shelving2 dB to -6 dB per octave over 5 kHz to27 kHz slope CONSTRUCTION Enclosure type Dual variable distributed ported Volume 235 L (8.3 cu.ft) Dimensions 1100 x 680 x 480mm(43.50 x 26.75 x 19.00”) Finish High density birch ply, walnut veneered, with solid walnut trim, 25 mm (1”) thick front baffle. Internally cross braced and heavily damped.

Tannoy Kensington GR, Standlautsprecher (Paarpreis) The flagship 250 mm (10.00”) Dual with its Alnico magnets, identified by its PepperPot Waveguide, is fitted with the latest Tannoy GR cone material, comprising a bespoke paper pulp infused with fibres to increase its rigidity. Combined with the new 50mm (2.00”) aluminium-magnesium alloy cone, the Kensington GR Dual offers an expansive sound stage, extremely high power handling and class-leading musical communication. The Kensington GR is set to follow its predecessor models as being the bestselling Prestige loudspeaker for its outstanding performance, small footprint and elegant design. To match the new Alnico GR Dual, the Kensington crossover has been extensively upgraded with custom-specification ICW ClarityCap™ MR capacitors, low loss laminated core inductors and thick-film resistors, before the entire unit is Deep Cryogenically Treated. This technology brings a wealth of benefits to the Kensington GR sound, including more spacious soundstage, crisper micro dynamic detailing and an exceptional natural HF response. The Kensington GR is hand built in the time-honoured Tannoy fashion to ensure that attention to detail and unique styling go hand in hand in maintaining the exclusive appeal of this highly respected loudspeaker. It’s 18mm thick birch ply baffle and rear panel are extensively detailed with walnut inlays and machined metal trim. Easy room placement, adjustable HF power and luxury oiled veneer finish with machined metal trim ensure Kensington Gold Reference is as easy to live with as it is exhilarating to listen to. Gold Reference takes Tannoy’s Kensington to new levels of refinement in every respect. Specifications PERFORMANCE Recommended amplifier power 20 - 250 Watts Continuous power handling 125 Watts RMS Peak power handling 500 watt Sensitivity 93 dB (2.83 volt @ 1 m) Nominal Impedance 8 ohm Minimum Impedance 5 ohm Frequency Response 29 Hz - 27 kHz (-6 dB) Dispersion 90 degrees conical DRIVE UNITS Dual Concentric™ high frequency 52 mm (2.00") 52 mm (2”) aluminium/magnesium alloy dome with round voice coil Dual Concentric™ low frequency 250 mm (10”) with paper pulp cone and twin roll impregnated fabric surround.52 mm (2”) round wire voice coil CROSSOVER Frequency 1.1kHz Type Bi-wired, hard-wired passive, low loss. Time compensated.2nd order low pass. 2nd order high pass. Deep cryogenically treated Adjustment /- 3 dB over 1 kHz to 27 kHz shelving,2 dB to -6 dB per octave over 5 kHz to27 kHz slope CONSTRUCTION Enclosure type Distributed port Volume 105L (3.7 cu.ft) Dimensions 1100 x 406 x 338mm(43.50 x 16.00 x 13.33" ) Finish Particle board with high density birch ply baffle and rear panel, 18 mm (0.71”) thickness. Internally cross braced and heavily damped.

Tannoy Stirling GR, Standlautsprecher (Paarpreis) The Stirling GR crossover benefits from a widespread component upgrades including highest quality capacitors designed to Tannoy’s exacting specification. The entire crossover board undergoes Deep Cryogenic Treatment, a technique Tannoy developed for the flagship Kingdom Royal project. This improves the crystal structure of not only the components and cabling on the hard-wired crossover-board but throughout the contacts and solder joints leading to a smoother and more natural presentation. The Stirling GR cabinet is hand built from the finest plywood using traditional joinery methods to ensure that attention to detail and unique styling go hand in hand. A distributed port design for exemplary LF response from the 85 litre enclosure, the cabinet is finished in Prestige oiled real walnut wood veneer and complimented with solid walnut trim and edging, machined metal trim and adjustable HF power. Capable of handling peak input power of up to 340watts and boasting prodigious 91dB efficiency, the Stirling has the power and authority of much larger and more affluent loudspeakers. It is detailed, dynamic and outstandingly articulate sound with all the musical cohesion inherent with the Dual Concentric driver. Stirling GR offers the bespoke cabinetry and remarkable performance of Tannoy’s Prestige series, yet costs no more than a typical mass produced loudspeaker. Technische Daten Bestückung: 10“ Dual Concentric™ Treiber Empfindlichkeit: 91 dB (2,83 Volt, 1 m) Frequenzgang: 39 Hz - 25 kHz (-6 dB) Nennimpedanz: 8 Ohm Empf. Verstärkerleistung: 30 - 150 Watt Erhältliche Farbvariante: Walnuss gewachst Abmessungen HxBxT: 850 x 397 x 368 mm Gewicht: 23 kg pro Lautsprecher

Tannoy Turnberry GR, Standlautsprecher, Art&Voice Tip!!! (Paarpreis) Der Tannoy Prestige Turnberry GR ist ein hochmoderner Dual Concentric Lautsprecher im klassischem Tannoy Prestige Design. In der Frequenzweiche kommen für jeden Tonbereich spezielle Kondensatoren zum Einsatz: ICW Clarity Caps für den Hochtonbereich metallisierte Folienkondensatoren für den übrigen BereichDie Frequenzweiche kann an der Front justiert werden: +/ - 3 dB ab 1300 Hz bis 25.000 Hz abfallendDer Dual Concentric Lautsprecher hat einen Durchmesser von 250 mm. Im Zentrum befindet sich der 33 mm Hornhochtöner mit einer Aluminiummembran. Die Schallführung des Hochtöners durchläuft den sogenannten "Tulip Waveguide".Die Übergangsfrequenz bei der Tannoy Prestige Turnberry GR vom Bass-/ Mittenlautsprecher auf den Hochtöner liegt bei 1300 Hz. Die Empfindlichkeit ist mit 93 dB (2,83V/ 1m) sehr hoch. An der Rückseite befindet sich ein Bi-wiring Anschlußterminal mit WBT Anschlußklemmen. Ein fünfter Anschluß ist ideal bei Lautsprecherkabel die eine Extraschirmung haben. Die Oberfläche der Tannoy Prestige Turnberry GR besteht aus Walnussfurnier, die Ecken bestehen aus Walnuss in Vollholz.  Technische Daten Bestückung: 10“ Dual Concentric™ Treiber Empfindlichkeit: 93 dB (2,83 Volt, 1 m) Frequenzgang: 34 Hz - 25 kHz (-6 dB) Nennimpedanz: 8 Ohm Empf. Verstärkerleistung: 30 - 180 Watt Erhältliche Farbausführung: Walnuss gewachst Abmessungen HxBxT: 950 x 456 x 336 mm Gewicht: 30 kg pro Lautsprecher

Tannoy Westminster Royal, Standlautsprecher (Paarpreis) Key to the Westminster Royal GR Driver is revised material for the main 15in cone and a new 50mm (2.00”) diaphragm for the HF compression driver. The LF/MF cone material remains a paper-pulp base with fibres introduced into the mix to improve the stiffness to weight ratio. While previous flagship Duals were stiffened with natural capoc fibres, the Gold Reference Duals integrate a bespoke Tannoy synthetic fibre that delivers more uniformed mechanical integrity across the entire surface area of the cone. The result is effortless LF performance with outstanding speed and dynamic attack. At the heart of the Westminster Royal GR Dual, the new 2” compression driver uses an aluminium-magnesium alloy dome heat treated to Tannoy’s exacting specifications. The diaphragm is terminated with a Mylar™ surround, delivering a technically and subjectively significant upgrade over the previous Prestige HF units. Delivering exceptional clarity and articulation throughout the HF range the new unit gives Westminster Royal GR even greater naturalness and presence. The massive Westminster Royal GR crossover is meticulously hand-made by Tannoy engineers and comprises some of the finest audio components available today. Tannoy’s bespoke ICW ClarityCap™ MR capacitors, low loss laminated core inductors and thick-film resistors are hard-wired into the crossover with silver plated cable and high-silver content solder. The entire crossover board in then Deep Cryogenically Treated, improving the crystal structure of all conductors in the signals path, and leading to sweet, open and incredibly detailed musical performance. The glorious Westminster Royal GR cabinet is hand built from the finest birch plywood by Tannoy’s most experience cabinet makers, each cabinet weighing close to 140kg when finished. The complex, compound horn design and curved front baffle allow the 15in Dual to ‘breath’ like no other Prestige model, delivering truly real-world dynamics and musical integrity. The luxury oiled-wood walnut veneer on panels and inlays, the gold trim and return of the classic Tannoy lightning strike logo exude the regal class of bespoke furniture. With its new 15in Dual, DCT crossover and new terminal panel featuring the latest WBT NextGen™ WBT-0703 speaker posts, the Westminster Royal GR delivers musical engagement with the same breath-taking scale as its visual splendour. With Tannoy’s High Frequency Power Switch for fine tuning HF output and a matching woven-cloth grille, the Westminster Royal GR can be integrated into a wide range of rooms and décor. The Westminster Royal GR is an effortlessly capable loudspeaker that honours the decades of Dual Concentric technology but also of Tannoy the brand. The Westminster Royal GR is set to become a true Tannoy classic. Specifications PERFORMANCE Recommended amplifier power 20 - 350 Watts Continuous power handling 175 Watts RMS Peak power handling 700 watt Sensitivity 99 dB (2.83 volt @ 1 m) Nominal impedance 8 Ohms Minimum Impedance 5 ohm Frequency Response 18 Hz - 27 kHz (-6 dB) Dispersion 90 degrees conical DRIVE UNITS Dual Concentric™ high frequency 52 mm (2”) aluminium/magnesium alloy dome with round wire voice coil Dual Concentric™ low frequency 380 mm (15”) with paper pulp cone and twin roll impregnated fabric surround. 52 mm (2”) round wire voice coil. CROSSOVER Crossover Type Bi-wired, hard wired passive, low loss. Time compensated.2nd order low pass. 2nd order high pass.Deep cryogenically treated Crossover Frequency B200 Hz acoustical, 1.0 kHz electrical. Adjustment +/-3 dB over 1.0 kHz to 27 kHz shelving,+ 2 dB to -6 dB per octave over 5 kHz to27kHz slope CONSTRUCTION Enclosure type Compound horn Volume 530L (18.7 cu.ft) Dimensions 1395 x 980 x 560mm(55.00 x 38.50 x 22.00”) Finish High density birch ply, walnut veneered, with solid walnut trim and edging