Opera Callas Diva, Standlautsprecher (Paarpreis) Das neue Modell Callas Diva ist ein Drei-Wege-Standlautsprecher, der das gleichnamige Vorgängermodell ablöst. Er wurde komplett neu entwickelt. Die Leistung der neuen Callas Diva ist auf dem Niveau des Grand Callas Modells, aber mit einer deutlichen Verringerung der Lautstärke, um in kleineren Räumen verwendet werden zu können.  Technische Daten Opera Callas Diva Bass-Reflex Standlautsprecher mit zusätzlichen Hochtönern auf der Rückseite (Dipol) Belastbarkeit: 240 Watt (RMS) Wirkungsgrad: 89 dB/1 Watt/1 Meter Größe: 30 x 130 x 55 cm (BxHxT) Gewicht: 79 Kg

Opera Callas, Kompaktlautsprecher (Paarpreis) Mit der Callas eröffnet Opera Musikliebhabern neue klangliche Dimensionen in punkto räumlicher Abbildung, Dynamik, Timbre sowie ermüdungsfreiem Hören. Sie ist ein kompakter Zwei-Wege-Lautsprecher, konzipiert für die Aufstellung auf dem Standfuß oder im Regal. Bei der Gestaltung des Gehäuses wurde besondere Sorgfalt auf die Beseitigung von internen Reflexionen gelegt. Die neue Callas ist rückseitig mit einem Schalter ausgestattet, um den Frequenzbereich zwischen 300 Hz und 3000 Hz einzustellen. Dadurch wird die Flexibilität der Lautsprecher bei der Aufstellung deutlich erhöht. Kraft und Dynamik bei niedrigen Frequenzen sind angesichts der Größe des Lautsprechers erstaunlich. Technische Daten System: two ways, stand mounting, Reflex with rear duct, bi-wiring Front firing Loudspeakers: 1 x 7” long-throw woofer with polypropylene re-cooked cone and phase plug, 1 x 1” Scanspeak 9700 tweeter without ferrofluid and double decompression chamber Frequency response: 40-25000 Hz Cross-over: 12 dB/ott. For woofers; 18 dB/ott for the front tweeter Cross-over frequency: 300 – 2000 Hz approx Cross-over frequency: 2000 Hz (aprox.) Max Power: 100 Watt (without clipping) for musical programs with crest factor about 5 Amplifier: Starting from 10 Watt RMS Sensitivity: 89 dB/2.83 Volt/1 meter Nominal Impedance: 4 ohm (Zmi >3 ohm) Size: 42 x 24,5 x 42 cm (HxLxP) Weight: 15kg each

Opera Grand Callas (Paarpreis) Die komplett neuentwickelte Grand Callas ist ein Drei-Wege-Standlautsprecher, der das lange Zeit bekannte Vorgängermodell ablöst.Klanglich auf dem Niveau einer Opera Tebaldi, ist sie aber aufgrund deutlich reduzierter Abmessungen flexibler und unkritischer in der Aufstellung. Daten und Abmessungen Bass-Reflex Standlautsprecher mit zusätzlichen Hochtönern auf der Rückseite (Dipol) Scan Speak Hochtöner, Seas Mitteltöner und Bässe EQ-Anpassung für Bassberiech Belastbarkeit: 240 Watt (RMS) Terminals: BiWirung Wirkungsgrad: 89 dB/1 Watt/1 Meter Größe: 30 x 130 x 55 cm (BxHxT) Gewicht: 79 Kg The new Callas speakers use techniques and components that represent the state of the art in electroacoustic, starting from the cabinet., the speakers and the crossovers. The result is tonally correct, realistic , engaging, and above all enjoyable to listen to. The new model Callas is an example of elegance and fits discreetly into any environment . Callas 2014 is a compact two-way loudspeaker (14 litres) of medium-small size which can be placed on a shelf or a stand . Its main feature is the low-frequency response, extended and controlled, combined with a typical sensitivity of froorstanding speakers. The woofer is a 7-inches, "long-throw", with annealed polypropylene diaphragm combined with the Scanspeak 9700 tweeter (the same used for Tebaldi, Malibran, Caruso and the new Grand Callas 2014) . The woofer is reflex loaded with a rear duct . Great care has been placed in the elimination of the internal reflections to ensure maximum transparency in the voice reproduction. Callas 2014 is equipped with a switch that allows you to adjust the output of the vocal range (+2 dB between 300 and 3000 Hz). This increases greatly the flexibility of the diffuser that fits both to a greater number of environmental situations . The new Callas produces a sound stage that expands in three dimensions with an excellent impulse response and power , dynamics and extension at low frequencies typical of systems of much higher dimensions . This speaker is also suitable for the "near field" listening (up to one meter to the listening point).

Opera Grand Mezza MK II (Paarpreis) Obviously this does not preclude the use of Grand Opera Mezza 2012 with even the most extensive and powerful amplifiers (up to over 200 Watts RMS per channel) provided the amplifier is of good quality and is protected against excessive clipping.The Opera Grand Mezza 2012, compared to the previous 2007 model, has been completely revamped. It is a floor-standing three-way column speaker that is reflex loaded. There are two 5" long-throw SEAS woofers with polypropylene cones and a 5” SEAS midrange driver. The cones are made from double-treated paper. The tweeter, by Scanspeak, is the same we use on the more expensive Seconda and Quinta 2011 models. Impedance for the Grand Mezza is a nominal 4 ohms.The Opera Grand Mezza 2012 is a comprehensive and versatile speaker system suitable for the most demanding musical programs, and it can be used in sophisticated home theater systems as well. Technical Specs Dimensions: 20 x 100 x 35 cm ( LxHxD) Weight: 19kg System: 3 ways, floorstanding, reflex with front firing duct Finiture: pelle Speakers: 2x5” woofer (Seas) polypropylene, 1x5” midrange (Seas) double trated cone Ways: 2 Frequency response: 40 -20000 Hz Cross-over: Parallel, low pass : 12 dB/oct between woofer ond midrange. Cascaded Low pass at 2000 Hz, High pas:  12 dB/oct (tweeter) Cross-over frequency: 200 & 2000 Hz Power: 120 watt RMS Amplifier: 10 Watt RMS o più senza clipping Sensibilità: starting from 10 Watt RMS or more – far from clipping condition Nominal Impedance: 4 ohm (Z min > 4 ohm) Potenza Massima: 120 watt RMS In room position: far from room angles

(Paarpreis) Description This diffuser is equipped with a couple of reflex ducts on the rear side which may be closed with two polyurethane cylinders. Other  improvement has been made on then cabinet    (more rigid) and the cross-over. Driver The new 7” woofer is a custom model, made by Scanspeak, for the whole new Classica series. This woofer has an excellent performance in the mid frequencies enough to be used as a midrange in the Quinta model. It is equipped with an aluminum diaphragm,  a 38 mm coil (two-layer, CCWA wire) with aluminium former immersed in a suitably shaped air gap. There is also a metal ring around the pole piece to control the flux variations. The basket is die-cast for maximum stiffness. Compared to its predecessor the volume displacement is increased by a significant 25%. The rigid aluminium diaphragm is free from  subharmonics and from transverse modes and perfectly reproduces the lower frequencies. The two woofers, connected in parallel, share the same 40 liters enclosed volume. The tweeter, a D26 series made by Scanspeak, has a one inch high quality treated soft dome, double magnet, decompression chamber, ferrofluid, aluminum flange and a one mm. peak to peak linear excursion (the double of a conventional tweeter). The frequency response extends to 30kHz (0 dB) and 40 kHz are reproduced 6 dB down. The resonant frequency is about 860 Hz which makes this tweeter insensitive to vibrations from other loudspeakers (if any due to the heavy 30 mm MDF the front panel).Crossover The crossover circuit, two ways and a half, is divided into two different boards placed at suitable distance from each other, to reduce the effects of mutual inductance of coils. The tweeter high-pass sections is designed to minimize the microphonic effect (something rarely done).  The capacitors used in the signal path have been carefully selected. This also contributes to the stability of the virtual central channel to create a stable and precise soundstage. Cabinet The cabinet re-proposes, in the upper part, the curvature of the Malibran model. The front panel, MDF (30 mm thick) is wide enough to accommodate the loudspeakers, has rounded edges and is covered in leather that also acts as a seal for the speaker. The sides of the cabinet are veneered with real wood and finely polished. The structure is further stiffened by internal bracing. Inside the cabinet there are two layers of pyramidal shaped, 10 cm thick, polyurethane which absorb the rear radiation of the woofers. As a consequence Consistency and Clarity are the hallmarks of the sound of this speaker. Opera Quinta is equipped with strong iron bars for wheels or spikes.The four externel connectors (Quinta is designed for bi-wiring) are the traditional gold-plated brass connectors, the same for all Opera speakers, including our top models. They accept any kind of termination providing a safe and effective electrical and mechanical contact.The insensitivity of the closed box system to sub-sonic frequencies makes our diffusers specially suited to the reproduction of analog records (LPs). The Opera Seconda is also suited to be used as front and / or rear channel in home theater systems: with two pairs of Opera Seconda you can get an Home Theater System that requires no center channel and no sub-woofer.Particular attention has been paid to the electrical impedance curve to get a diffuser less sensitive to the quality of the cables and amplifier (tube or solid state). Opera Seconda is a true 4 ohm nominal impedance system that meets the DIN 45500 standards (minimum impedance greater than 3.2 ohms) that can be driven by any amplifier suited for 4 ohm nominal load.Opera Seconda is a final diffuser: with full extension of the low frequency, capable of reproducing important volumes of sound, easy to insert into the room, with a clear and defined midrange and an high frequency reproduction typical of our top speakers.   Technical Specs Dimension: 33 x 20 x 28 cm (h x w x d) Weight: 19Kg (pair) System: Stand or bookshelf , reflex Loudspeakers: 1 woofer 6.5” aluminum diaphragm Number of ways: 2 Frequency response: 40-20000 Hz Cross-over: 12 dB/oct low pass, 12 dB/oct high pass, Frequency 2000Hz Amplifier: from 10 watt without clipping Sensitivity: 91 db 2.83 Vrms at 1 mt Nominal impedance: 4 ohm (Z min > 3.5 ohm) Power: 70 watt RMS Room positioning(on stand): 30 cm from side

Die Opera Prima V2 repräsentiert den traditionellen Anspruch italienischer Lautsprecherbaukunst in einer kompakten Form, ohne akustische Kompromisse einzugehen. Der aufwendig konstruierte Hochtöner mit Aluminium-Frontplatte gewährleistet eine exakte Hochtonabbildung, während der Tiefmitteltöner mit eloxiertem Aluminium-Konus eine kraftvolle und zugleich kontrollierte Basswiedergabe liefert. Ihr lineares Abstrahlverhalten und die harmonische Frequenzverteilung ermöglichen eine realitätsnahe Bühnenabbildung.Technische DatenSystem: 2-Wege-BassreflexHochtöner: 26 mm Seidenkalotte, doppelter Ferritmagnet, Aluminium-FrontplatteTiefmitteltöner: 180 mm, schwarz eloxierter Aluminium-Konus, FerritmagnetEmpfindlichkeit: 90 dB (2,83 V / 1 m)Frequenzgang: 50 Hz – 21.000 Hz (-3 dB)Übergangsfrequenz: 2.500 HzNennimpedanz: 6 OhmMindestimpedanz: 3,8 OhmEmpfohlene Verstärkerleistung: 25 – 100 WattMaximale Leistung (ohne Clipping): 100 WattAbmessungen (B x H x T): 237 x 428 x 390 mmGewicht: 14 kg 

Opera Quinta SE (Paarpreis) Basierend auf dem Erfolgsmodell Seconda wurde die Quinta SE um eine komplett eigenständige Mittensektion erweitert.Trotz der Verwendung von luxuriösen Materialien und qualitativ sehr hochwertigen Lautsprecherchassis bietet diese Reihe ein optimales Preis-Leistungs-Verhältnis.Die Gehäuse sind aus MDF und es stehen hochwertige Echtholz-Furniere zur Auswahl.Alle Modelle sind mit von SEAS oder Scan-Speak speziell für Opera gefertigten Treibern bestückt.Die Frontblende, die Rückseite und die obere und untere Gehäuseplatte sind mit Leder überzogen. Die Verarbeitungsqualität ist hervorragend, wie sie es von Opera erwarten dürfen. Scan-Speak 9700 Hochtöner mit Texti kalotte, fluidgedämpft !! Zwei 7-Zoll Tieftöner von Seas mit Aluminiummembran 7-Zoll Mitteltöner von Seas mit HQ-Polypropylen-Membran mit ABS-Phaseplug 3-Wege Standlautsprecher Wirkungsgrad: 91 dB/1 Watt/1 Meter Größe: 24,5 x 110 x 43 cm (BxHxT) Gewicht: 51 Kg Opera Audio Quinta The new Quinta Model, although part of the Classica series, makes an important qualitative leap in the absolute quality of the reproduction and in the “value for money” that becomes even more competitive.Opera Quinta is a final diffuser: it has full extension of the low frequency, capable of reproducing important volumes of sound, easy to insert into the room, with a clear and defined midrange and an high frequency reproduction typical of our top speakers. Technical Specs Size: 110 x 24.5 x 43 cm   43 x 9.5 x 17 inches (hxwxd) System: Floor-standing column -  Reflex Finiture: pelle Loudspeakers: 2 x 7” woofer  -  Alu cone,1 x 7” midrange - annealed polypropylene and ABS phase plug, 1 x 1” Scanspeak  9700 Tweeter Ways: 3 Frequency response: 30-30000 Cross-over: Woofer: 18 dB low pass, Midrange: 12 dB Low pass and high pass, Tweeter : 18 dB high pass Crossover frequency: 300 – 2000 Hz approx Power: 140 watt RMS Amplifier: From 10 to 200 Watt RMS or more – With out Clipping Sensitivity: 91 dB/2.83Vrms/1 meter Nominal Impedance: 4 ohm Position in the room: away from corners

Die Opera Quinta V2 ist ein in Italien gefertigter Standlautsprecher, der auf einem symmetrischen Drei-Wege-Konzept basiert. Zwei 7-Zoll-Tieftöner, ein 6,5-Zoll-Mitteltöner sowie eine 1-Zoll-Seidenkalotte arbeiten in einer akustisch ausgewogenen Gehäusearchitektur mit separierten Kammern für Mittel- und Tieftonbereich. Diese Struktur ermöglicht eine saubere Kanaltrennung und verhindert störende Resonanzen innerhalb des Gehäuses.Das Frequenzverhalten ist auf Natürlichkeit und räumliche Präzision ausgelegt. Die interne Weichenarchitektur nutzt hochwertige Bauteile und erlaubt eine gleichmäßige Energieverteilung über das gesamte Spektrum. Der Wirkungsgrad liegt bei 91 dB, womit der Lautsprecher auch mit leistungsschwächeren Verstärkern betrieben werden kann. Die handverarbeitete Oberfläche, wahlweise in Walnuss oder Grau meliert, unterstreicht den wohnraumfreundlichen Anspruch des Systems. Die Opera Quinta V2 eignet sich für anspruchsvolle Hörerinnen und Hörer, die eine tonal balancierte und musikalisch authentische Wiedergabe bei gleichzeitig moderater Aufstellung im Raum bevorzugen.Signifikante AlleinstellungsmerkmaleSymmetrisches Drei-Wege-SystemSorgt für eine ausgewogene Klangbühne mit präziser Ortung der InstrumenteSeparate Kammern für Tiefton und MitteltonVerhindern gegenseitige Beeinflussung – für mehr Klarheit im MitteltonHochwertige SeidenkalotteMit feinzeichnender Hochtonauflösung – ideal für Stimmen und akustische InstrumenteBassreflexsystem mit rückwärtiger ÖffnungErmöglicht tiefen, kontrollierten Bass – auch bei moderater LautstärkeEdles Echtholzfurnier oder Grau MeliertSorgt für wohnraumfreundliche Integration in klassischem oder modernem AmbienteHoher Wirkungsgrad (91 dB)Spielt auch mit Röhrenverstärkern oder kompakten Transistor-Amps auf hohem NiveauHandgefertigt in ItalienTraditionelle Lautsprecherbaukunst trifft auf moderne AkustikentwicklungTechnische DatenSystem: 3-Wege-Standlautsprecher, BassreflexHochtöner: 1" SeidenkalotteMitteltöner: 6,5" mit separatem GehäusevolumenTieftöner: 2 × 7"Frequenzgang: 35 Hz – 30.000 HzÜbergangsfrequenzen: 300 Hz / 2.500 HzImpedanz: 4 OhmWirkungsgrad: 91 dB (2,83V/1m)Empfohlene Verstärkerleistung: 10 – 200 WattAnschlussart: Bi-Wiring-TerminalsAbmessungen (H × B × T): ca. 1100 × 260 × 400 mmGewicht: ca. 34 kg pro Stück Gehäusematerial: MDF, mehrfach versteiftOberflächen: Grau Meliert, WalnussHerkunft: Handgefertigt in Italien

Opera Seconda SE, Standlautsprecher (Paarpreis) Describtion This diffuser is equipped with a couple of reflex ducts on the rear side which may be closed with two polyurethane cylinders. Other  improvement has been made on then cabinet    (more rigid) and the cross-over. Driver The new 7” woofer is a custom model, made by Scanspeak, for the whole new Classica series. This woofer has an excellent performance in the mid frequencies enough to be used as a midrange in the Quinta model. It is equipped with an aluminum diaphragm,  a 38 mm coil (two-layer, CCWA wire) with aluminium former immersed in a suitably shaped air gap. There is also a metal ring around the pole piece to control the flux variations. The basket is die-cast for maximum stiffness. Compared to its predecessor the volume displacement is increased by a significant 25%. The rigid aluminium diaphragm is free from  subharmonics and from transverse modes and perfectly reproduces the lower frequencies. The two woofers, connected in parallel, share the same 40 liters enclosed volume. The tweeter, a D26 series made by Scanspeak, has a one inch high quality treated soft dome, double magnet, decompression chamber, ferrofluid, aluminum flange and a one mm. peak to peak linear excursion (the double of a conventional tweeter). The frequency response extends to 30kHz (0 dB) and 40 kHz are reproduced 6 dB down. The resonant frequency is about 860 Hz which makes this tweeter insensitive to vibrations from other loudspeakers (if any due to the heavy 30 mm MDF the front panel). Crossover The crossover circuit, two ways and a half, is divided into two different boards placed at suitable distance from each other, to reduce the effects of mutual inductance of coils. The tweeter high-pass sections is designed to minimize the microphonic effect (something rarely done).  The capacitors used in the signal path have been carefully selected. This also contributes to the stability of the virtual central channel to create a stable and precise soundstage. Cabinet The cabinet re-proposes, in the upper part, the curvature of the Malibran model. The front panel, MDF (30 mm thick) is wide enough to accommodate the loudspeakers, has rounded edges and is covered in leather that also acts as a seal for the speaker. The sides of the cabinet are veneered with real wood and finely polished. The structure is further stiffened by internal bracing. Inside the cabinet there are two layers of pyramidal shaped, 10 cm thick, polyurethane which absorb the rear radiation of the woofers. As a consequence Consistency and Clarity are the hallmarks of the sound of this speaker. Opera Quinta is equipped with strong iron bars for wheels or spikes.The four externel connectors (Quinta is designed for bi-wiring) are the traditional gold-plated brass connectors, the same for all Opera speakers, including our top models. They accept any kind of termination providing a safe and effective electrical and mechanical contact.The insensitivity of the closed box system to sub-sonic frequencies makes our diffusers specially suited to the reproduction of analog records (LPs). The Opera Seconda is also suited to be used as front and / or rear channel in home theater systems: with two pairs of Opera Seconda you can get an Home Theater System that requires no center channel and no sub-woofer. Particular attention has been paid to the electrical impedance curve to get a diffuser less sensitive to the quality of the cables and amplifier (tube or solid state). Opera Seconda is a true 4 ohm nominal impedance system that meets the DIN 45500 standards (minimum impedance greater than 3.2 ohms) that can be driven by any amplifier suited for 4 ohm nominal load.Opera Seconda is a final diffuser: with full extension of the low frequency, capable of reproducing important volumes of sound, easy to insert into the room, with a clear and defined midrange and an high frequency reproduction typical of our top speakers.   Technical Specs Size: 102 x 24.5 x 43 cm (h x w x d) Net Weight: 45kg System: Floor-standing column -  Closed box Finiture: pelle Loudspeakers: 2 x 7” woofer  -  Alu cone, 1 x 1” Scanspeak  Tweeter  D26, Silk, decompressed, Magnetic fluid Ways: 2 and a half Frequency response: 30-30000 Hz Cross-over: Woofer: 12 dB low pass Tweeter : 12 dB high pass Cross-over frequency: 2200 Hz approx Power:140 watt RMS Amplifier: From 10 to 200 Watt RMS or more – With out Clipping Sensitivity: 89 dB/2.83Vrms/1 meter Nominal Impedance 4 ohm (minimo > 3.2)